I have a Antec 900 Black Steel ATX Mid Tower Computer Case I had a some problems with it .it was that a megahalem couldn’t fit with the rear top fan on.I have this case in front of me. So let me tell you what I dislike about this case.that there is No fan filters. Fans only have Molex connectors, no fan controller Side Panel fan cannot be installed with larger heatsinks Too little cable management holes. They’re not placed in the best position. No heat sink cut-out . Front audio ports have white noise due to a grounding problem Need to take thumbnaill screws to remove a hard drive cage, and then remove four screws to take out the hard drive. There isn’t a hole underneath the PSU, so the PSU must be mounted upside down.tell me what to do??
