Dr Prem Life Improving Logo-R

Different ways to insulate basement walls

<![CDATA[Among the most common Contractor mistakes often seen most of the times are basements that have not been correctly insulated. In most cases, the results are always terrible leading to severe mildew problems.

Remember that insulation is always less critical below the ground level. To help save money, only insulate the part of the wall that extends above the ground level, though insulating the full height of the wall walls will give additional value. Whichever way, ensure you pay special attention to the area above the sill. With the crawlspace walls, such insulating methods might cause frost-heave issues in very cold regions. See below for tips on how to insulate basement walls.

Install vapor barrier

Since basements are moist, it’s vital to prevent any extra moisture from entering them. Moisture causes mold in your insulation, something that can be costly to fix. To combat such issue, install a product such as extruded polystyrene insulation perhaps between concrete walls and wood frame you will build for basement insulation. Use all-purpose glue to attach boards to the wall then construction tape to seal joints.

Frame a wall from wood

Use a composite decking on the basement floor for protection of extra moisture. Otherwise, you can use standard wall-framing methods to build wall studs. Use a level for plumbing framed wall.

Insulate the cavity

There are several types of basement insulation. Three of the most known types are sprayed foam insulation, batt-and-roll insulation, and loose-fill insulation that insulate the basement walls.

For batt-and-roll insulation, nail the insulation into the wood frame. Batt-and-roll insulation is obtainable in standard wall-frame sizes.

For loose-fill insulation, just install drywall on the studs before you get to add loose-fill insulation.

Sprayed-foam insulation is actually the most energy-efficient choice for insulating basements. It may be essential to rent equipment to insulate basement with the wet-sprayed cellulose. The equipment is obtainable at most hardware stores.

Cover the insulation with wall surface

Whether you choose loose-fill insulation, sprayed-foam insulation, or batt-and-roll insulation, you don’t want to leave that insulation exposed. You’ve got several options for the wall surfaces. You can use drywall to cover basement insulation, however if aesthetics aren’t your concern, you can as well cover the insulation with surfaces such as plywood or any other that you choose.

Summary You can use various types of insulation as mentioned above.  All these depend on the place you live and the available space to add it.]]>

Recent Articles:

Scroll to Top